ngIRCd Users

ngircd@lists.barton.de

424 Diskussionen

Great Server you've got here!
by David Hope 03 Sep '03

03 Sep '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Just want to say a big thanks on this server, it's so much easier to compile and setup than something like bahamut, and without a ton of useless features!, shame about the lack of supported services (see, some people do check the archives :P ), but hey, since it'll only be sitting on my lan where I can test script intergreation with IRC, it's great! Dave. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE/VcZOQZV70iXX1ksRAhIhAKDLhGPJ/7YW67q3FbWsJ6RX5nMtwQCgy+MS uv3h3zScwspucLpRoojcgSs= =+EPk -----END PGP SIGNATURE-----

1 0

Don't understand how to make IRC ops
by Steve Bularca 20 Jul '03

20 Jul '03

The config was slightly confusing for me, and so i honestly dont know how to make myself an IRC op. I mean, I tried putting my nick in there, and setting a password but it didn't work. Thanks in advance, SteveB.

2 1

ngIRCd 0.7.1
by Alexander Barton 18 Jul '03

18 Jul '03

Hi all :-) Due to server upgrades ngIRCd 0.7.1 had to wait a few days, but finally here it is! Changes since 0.7.0 are: - Included files to build Debian packages (located in "debian/"). - Updated config.guess and config.sub to newer upstream versions. - NJOIN propagates user channel modes correctly again ... Upsa. - Made Makefile more compatible with "make -j<n>". - Added support for GNU/Hurd. - Fixed a compiler warning related to an unnecessary assert(). - Enhanced VERSION command when using debug versions. It's available from (~265 KB): - <http://download.berlios.de/ngircd/ngircd-0.7.1.tar.gz> - <ftp://ftp.berlios.de/pub/ngircd/ngircd-0.7.1.tar.gz> - <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/ngircd-0.7.1.tar.gz> The patch from 0.7.0 to 0.7.1 (~14 KB) and GnuPG signatures: - <ftp://ftp.berlios.de/pub/ngircd/> - <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/> Regards Alex -- Alexander Barton, Freiburg, Germany alex(a)barton.de, http://www.barton.de/

1 0

Debian packages
by Alexander Barton 09 Jul '03

09 Jul '03

Hi again :-) I'm trying to build debian packages of ngIRCd at the moment. Actually my results do work but aren't the greatest stuff mankind ever saw ... Anyway, if you want to try it out, add these two line to your /etc/apt/sources.list: deb ftp://Arthur.Ath.CX/debian/ ab main deb-src ftp://Arthur.Ath.CX/debian/ ab main Comments welcome! Regards Alex PS.: there are only packages for the i386 architecture available at the moment ... -- Alexander Barton, Freiburg, Germany http://www.barton.de/, alex(a)barton.de

1 0

CVS-HEAD/branch-0-7-x: fixed mode propagation bug in NJOIN
by Alexander Barton 09 Jul '03

09 Jul '03

Hi all! I fixed up a mode propagation problem in the IRC_NJOIN() function that caused the server to not propagate user channel modes to other servers correctly under certain circumstances (networks with more than two levels of server nesting). These fixes are in CVS HEAD and branch-0-7-x: - Included files to build Debian packages (located in "debian/"). - Updated config.guess and config.sub to newer upstream versions. - NJOIN propagates user channel modes correctly again ... Upsa. If branch-0-7-x seems to be stable this will become version 0.7.1 at the end of this week. Additionally CVS-HEAD includes these changes (since 0.7.0): - Made Makefile more compatible with "make -j<n>". - Added support for GNU/Hurd. - Fixed a compiler warning related to an unnecessary assert(). Perhaps these will go into 0.7.1, too ... Regards Alex -- Alexander Barton, Freiburg, Germany http://www.barton.de/, alex(a)barton.de

1 0

newbie: how to set up services ?
by Doberm4nn 20 Jun '03

20 Jun '03

Hello! I have just installed ngIRCd on Mac OS X, it works perfectly, but I have no idea on how to set up services like chanserv, nickserv, and other stuff like that... Can someone help me ? Thanks a lot dobermann ps: excuse my english :\

2 1

ngIRCd 0.7.0
by Alexander Barton 01 Mai '03

01 Mai '03

Hi! ngIRCd 0.7.0 is out :-) You can download it from the following places (~250 KB): - <http://download.berlios.de/ngircd/ngircd-0.7.0.tar.gz> - <ftp://ftp.berlios.de/pub/ngircd/ngircd-0.7.0.tar.gz> - <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/ngircd-0.7.0.tar.gz> Patches from 0.6.1 and GnuPG signatures are available, too: - <ftp://ftp.berlios.de/pub/ngircd/> - <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/> Please have a look into the INSTALL file when upgrading! Some configuration options changed since 0.6.1 ... This is the complete ChangeLog since ngIRCd 0.6.1: ngIRCd 0.7.0 (2003-05-01) - "ServerName" is checked better now: a dot (".") is required. - The KILL comand verifies and logs more parameters. ngIRCd 0.7.0-pre2 (2003-04-27) - CVS build system fixes (made autogen.sh more portable). - Fixed compilation and test-suite on Solaris (tested with 2.6). - New documentation file "doc/Platforms.txt" describing the status of ngIRCd on the various tested platforms. - Test for broken GCC on Mac OS X and disable "-pedantic" in this case. - Disable "-ansi" on Cygwin: system headers are incompatible. - The server tried to connect to other servers only once when DNS or socket failures occured. - Fixed --configtest: There is no variable "ServerPwd", it's "Password". ngIRCd 0.7.0-pre1 (2003-04-22) - New signal handler (more secure, actions are executed outside). - GCC: the compiler is now called with more warning options enabled. - Replaced a lot of str[n]cpy(), str[n]cat() and sprintf() calls with the more secure functions strlcpy(), strlcat() and snprintf(). On systems that don't support strlcpy() and strlcat(), these functions are included in the libngportab now (with prototypes in portab.h). - If the server can't close a socket, it panics now. This is an error that can't occur during normal operation so there is something broken. - The order of log messages during disconnects is more "natural" now ;-) - Cleaned up handling of server configuration structures: modifying and removing servers during runtime works more reliable now. - Compression code from "conn.[ch]" is now found in new "conn-zip.[ch]" - Moved some connection functions from "conn.[ch]" to "conn-func.[ch]". - New command CONNECT to enable and add server links. The syntax is not RFC-compatible: use "CONNECT <name> <port>" to enable and connect an configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>" to add a new server (ngIRCd tries to connect new servers only once!). - Added DISCONNECT command ("DISCONNECT <name>") to disable servers. - Restructured the documentation: Now the main language is English. The german documentation has been removed (until there is a maintainer). - Enhanced killing of users caused by a nickname collision. - Better error detection for status code ("numerics") forwarding. - Moved tool functions to own library: "libngtool". - New command TRACE (you can trace only servers at the moment). - New command HELP that lists all understood commands. - There should no longer remain "unknown connections" (see e.g. LUSERS) if an outgoing server link can't be established. - Added AC_PREREQ(2.50) to configure.in for better autoconf compatibility. - Conn_Close() now handles recursive calls for the same link correctly. - ngIRCd can register itself with Rendezvous: to enable support pass the new switch "--with-rendezvous" to configure. - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to configure to enable it. - Changed some configure options to use "--with"/"--without" as prefix instead of "--enable"/"--disable": "--without-syslog", "--without-zlib", "--with-tcp-wrappers", and "--with-rendezvous". - Better error reporting to clients on connect. - Enhanced manual pages ngircd(8) and ngircd.conf(5). - Documentation is now installed in $(datadir)/doc/ngircd. - Enhanced hanling of NJOIN in case of nick collisions. Regards Alex -- Alexander Barton, Freiburg, Germany http://www.barton.de/, alex(a)barton.de

1 0

ngIRCd 0.7.0-pre2
by Alexander Barton 27 Apr '03

27 Apr '03

Hello! ngIRCd 0.7.0-pre2, hopefully the latest pre-release before 0.7.0, is available and can be downloaded from: <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/ngircd-0.7.0-pre2.tar.gz> As usual: please test :-)) Changes since 0.7.0-pre1: - CVS build system fixes (made autogen.sh more portable). - Fixed compilation and test-suite on Solaris (tested with 2.6). - New documentation file "doc/Platforms.txt" describing the status of ngIRCd on the various tested platforms. - Test for broken GCC on Mac OS X and disable "-pedantic" in this case. - Disable "-ansi" on Cygwin: system headers are incompatible. - The server tried to connect to other servers only once when DNS or socket failures occured. - Fixed --configtest: There is no variable "ServerPwd", it's "Password". Regards Alex -- Alexander Barton, Freiburg, Germany alex(a)barton.de, http://www.barton.de/

1 0

Password secure server
by Peter Arzamendi 27 Apr '03

27 Apr '03

Is there a way to password secure the server so that a client that wants to connect has to supply a password? thanks, Pete -- Peter Arzamendi <parzamendi(a)charter.net>

2 1

ngIRCd 0.7.0-pre1
by Alexander Barton 25 Apr '03

25 Apr '03

Hello! I just prepared ngIRCd 0.7.0-pre1. If this version appoves as stable and no more bugs are found it'll become ngIRCd 0.7.0 very soon :-) ngIRCd 0.7.0-pre1 contains all enhancements and fixes from CVS-HEAD. The new CVS branch has the tag "branch-0.7.x". Use "cvs up -d -P -r branch-0-7-x" to switch an existing CVS tree from HEAD to this branch. Changes since 0.6.1: - New signal handler (more secure, actions are executed outside). - GCC: the compiler is now called with more warning options enabled. - Replaced a lot of str[n]cpy(), str[n]cat() and sprintf() calls with the more secure functions strlcpy(), strlcat() and snprintf(). On systems that don't support strlcpy() and strlcat(), these functions are included in the libngportab now (with prototypes in portab.h). - If the server can't close a socket, it panics now. This is an error that can't occur during normal operation so there is something broken. - The order of log messages during disconnects is more "natural" now ;-) - Cleaned up handling of server configuration structures: modifying and removing servers during runtime works more reliable now. - Compression code from "conn.[ch]" is now found in new "conn-zip.[ch]" - Moved some connection functions from "conn.[ch]" to "conn-func.[ch]". - New command CONNECT to enable and add server links. The syntax is not RFC-compatible: use "CONNECT <name> <port>" to enable and connect an configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>" to add a new server (ngIRCd tries to connect new servers only once!). - Added DISCONNECT command ("DISCONNECT <name>") to disable servers. - Restructured the documentation: Now the main language is English. The german documentation has been removed (until there is a maintainer). - Enhanced killing of users caused by a nickname collision. - Better error detection for status code ("numerics") forwarding. - Moved tool functions to own library: "libngtool". - New command TRACE (you can trace only servers at the moment). - New command HELP that lists all understood commands. - There should no longer remain "unknown connections" (see e.g. LUSERS) if an outgoing server link can't be established. - Added AC_PREREQ(2.50) to configure.in for better autoconf compatibility. - Conn_Close() now handles recursive calls for the same link correctly. - ngIRCd can register itself with Rendezvous: to enable support pass the new switch "--with-rendezvous" to configure. - Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to configure to enable it. - Changed some configure options to use "--with"/"--without" as prefix instead of "--enable"/"--disable": "--without-syslog", "--without-zlib", "--with-tcp-wrappers", and "--with-rendezvous". - Better error reporting to clients on connect. - Enhanced manual pages ngircd(8) and ngircd.conf(5). - Documentation is now installed in $(datadir)/doc/ngircd. - Enhanced hanling of NJOIN in case of nick collisions. Download (~248 KB): - <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/ngircd-0.7.0-pre1.tar.gz> Patch from 0.6.1 to 0.7.0-pre1 (~70 KB): - <ftp://Arthur.Ath.CX/pub/Users/alex/ngircd/ngircd-0.6.1-0.7.0-pre1.patch.gz> Read the INSTALL file for upgrading information! Please test and report bugs to this mailing list. Thanks! Regards Alex -- Alexander Barton, Freiburg, Germany alex(a)barton.de, http://www.barton.de/

4 5

Springe zur Seite:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ngIRCd Users