Module: ngircd.git Branch: master Commit: 8ad1c23ae453e2f8ff95bccfdabdfed688539760 URL: http://ngircd.barton.de/cgi-bin/gitweb.cgi?p=ngircd.git&a=commit;h=8ad1c23ae... Author: Alexander Barton <alex@barton.de> Date: Fri Jun 25 15:19:39 2010 +0200 Add some documentation for using BOPM with ngIRCd --- doc/Bopm.txt | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 53 insertions(+), 0 deletions(-) diff --git a/doc/Bopm.txt b/doc/Bopm.txt new file mode 100644 index 0000000..bd14450 --- /dev/null +++ b/doc/Bopm.txt @@ -0,0 +1,53 @@ + + ngIRCd - Next Generation IRC Server + + (c)2001-2010 Alexander Barton, + alex@barton.de, http://www.barton.de/ + + ngIRCd is free software and published under the + terms of the GNU General Public License. + + -- BOPM.txt -- + + +I. Introduction +~~~~~~~~~~~~~~~~ + +Citing <http://wiki.blitzed.org/BOPM>: "BOPM is an open source open proxy +monitor, designed for use with hybrid-based ircds, although it can be used +with slight modification on any server which has the ability to show connects +to opers and that supports KLINEs." + +And starting with Release 17, ngIRCd supports all required log messages that +BOPM requires to be useful. + +II. Installation +~~~~~~~~~~~~~~~~~ + +Install BOPM as usual, please see the BOPM documentation for details. +Afterwards adjust the following configuration parameters that are important +for ngIRCd: + +a) BOPM "IRC" section: + + 1) Set "server" and "port" accordingly, + + 2) adjust the "oper" line to match an [Operator] block in ngircd.conf, + + 3) change "mode" to "+ci" or "+c". + + 4) Set "connregex" to the following string, everything in one line(!): + "\\*\\*\\* Notice -- Client connecting: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*"; + and comment all the other "connregex" examples (prepend a "#" character). + + 5) Set "kline" to "KILL %n :Open proxy found on your host!"; for example, + and comment all the other "kline" examples. + +b) BOPM "scanner" section: + + Make sure you configure a valid "target_ip" and "target_port" for the + configured scanners to test. And please note that you CAN'T USE the port + of ngIRCd, because ngIRCd doesn't send any banner message by default! + + So you need a service what sends a banner, so for example POP3, SMTP, + IMAP, or SSH daemons should work ...